Audi
BMW
Mercedes
Porsche
Range Rover
Tesla
Lamborghini
Ferrari
Volkswagen
Helix M ONE X – Small footprint mono versterker
Small, efficient and uncompromisingly stable – the M ONE X is a highly compact monoblock for subwoofer applications. Designed from latest Class D technology this tiny amp can easily control speakers with 1 Ohm impedance. Its current capability makes the M ONE X a perfect partner for 2 x 2 Ohms subwoofers, where both voice coils are connected in parallel. And for even more output power, two M ONE X amplifiers can be combined to one single powerhouse ā thanks to the TwinPower Link.
In addition a comprehensive and stunningly practical feature set leaves nothing to be desired. Last but not least installation will be a no-brainer due to the minimal dimensions.
Features
- Small footprint Class D amplifier with up to 1,180 Watts RMS output power @ 1 Ohm for easiest combination with all 2 x 2 Ohms subwoofers connected in parallel
- Start-Stop capability down to 6V supply voltage
- Smart highlevel input with ADEP circuit and Auto Turn-On function
- Integrated, active crossover with lowpass, bass boost, subsonicand phase control
- TwinPower Link for connecting two amplifiers in bridged mode
- Bass remote control for volume adjustment
- Low heat dissipation thanks to extraordinary efficiency
Special features
Smart highlevel input
The latest generation of OE car radios incorporates sophisticated possibilities of diagnosing the connected speakers. If a common amplifier will be hooked up failure messages and loss of specific features (e.g. fader function) quite often appear – but not with the MĀ ONE X.
The new ADEP circuit (Advanced Diagnostics Error Protection) avoids all these problems without loading the speaker outputs of the OE radio during high volumes unnecessarily.
Start-Stop capability
The switched power supply of the HELIX M ONE X assures operation even if the batteryās voltage drops down to 6 Volts during engine crank.
Technical data
| Power RMSĀ ā¤ 1% THD+N | Normal operation (One amplifier) |
TwinPower Link (Two amplifiers) |
| – @ 4 Ohms | 1 x 400 Watts | 1 x 1,400 Watts |
| – @ 2 Ohms | 1 x 700 Watts | 1 x 2,060 Watts |
| – @ 1 Ohm | 1 x 1,030 Watts | – |
| – bridged @ 4 Ohms | – | – |
| – bridged @ 2 Ohms | – | – |
| Max. output power per channel*: | Up to 1,180 Watts RMS @ 1 Ohm | |
| Amplifier technology | Class D | |
| Inputs | 2 x RCA / Cinch 2 x Highlevel speaker input 1 x Remote In 1 x Remote control input |
|
| Input sensitivity | RCA / Cinch 0.5 – 6 Volts Highlevel 1.1 – 13 Volts |
|
| Input impedance RCA / Cinch | 20 kOhms | |
| Input impedance highlevel | 9 – 33 Ohms | |
| Outputs | 1 x Speaker output | |
| Output voltage RCA / Cinch | – | |
| Signal converter for digital input | – | |
| Frequency response | 10 Hz – 250 Hz | |
| Bass boost | 0 – 12 dB / 30 – 80 Hz | |
| Highpass | – | |
| Lowpass | 50 Hz – 250 Hz adjustable | |
| Bandpass | 10 Hz – 250 Hz adjustable | |
| Subsonic | 10 Hz – 50 Hz adjustable | |
| Phase | 0 – 180Ā° adjustable | |
| Slope high- / lowpass | – | |
| Slope subsonic / lowpass | 12 / 24 dB/Oct. | |
| Signal-to-noise ratio digital input | – | |
| Signal-to-noise ratio analog input | 95 dB (A-weighted) | |
| Distortion (THD) | 0.20 % | |
| Damping factor | 150 | |
| Operating voltage | 10.5 – 16 Volts (max. 5 sec. down to 6 Volts) | |
| Idle current | 800 mA | |
| Fuse | 3 x 40 A Maxi-fuse (APX) | |
| Additional features | Active, adjustable crossover, bass boost, phase shift, Start-Stop capability, highlevel input with automatic turn on function and Advanced Diagnostics Error Protection (ADEP), bass volume cable remote control | |
| Dimensions (H x W x D) | 50 x 320 x 154 mm / 2.00 x 12.60 x 6.06ā |
|
| Merk | HELIX |
|---|
Gerelateerde producten
Versterkers
Versterkers
Versterkers
Versterkers
Versterkers
Versterkers
Versterkers
Versterkers
Versterkers